| Type of bed | Hardened Bed Ways |
|---|---|
| Length of Bed | 1825 mm ( 6″ ) |
| Admit between Centre | 1000 mm |
| Swing over bed | 420 mm |
| Height of centre | 215 mm |
| Width of bed | 277 mm |
| Swing over cross slide | 240 mm |
| Swing in gap | 620 mm |
| Length of gap in front of face plate | 125 mm |
Geared Head Medium Duty Lathe Machine Model No. VGM- 215
Chuck back plate
Centre adapter
Dead centres 2 nos
Tool post spanner
Motor pulley
Thread dial indicator
Change gear set
Chip tray
Norton gear box with double shaft
Independent chuck
Self centring chuck
Chuck back plate extra
Steady rest
Follow rest
Face plate
Carrier plate
Taper turning attachment
Coolant pump with tank and fittings
Rear tool post
Electricals (motor, wiring, switch, v- belts and fittings)
Splash guard
Panel board
Foundation round plate with levelling bolts
Quick change tool post
Key way attachment
Padel stop
Electrical third shaft
- Standard Accessories
-
Chuck back plateCentre adapterDead centres 2 nosTool post spannerMotor pulleyThread dial indicatorChange gear setChip trayNorton gear box with double shaft
- Optional Accessories
-
Independent chuckSelf centring chuckChuck back plate extraSteady restFollow restFace plateCarrier plateTaper turning attachmentCoolant pump with tank and fittingsRear tool postElectricals (motor, wiring, switch, v- belts and fittings)Splash guardPanel boardFoundation round plate with levelling boltsQuick change tool postKey way attachmentPadel stopElectrical third shaft
| Main spindle | |
| No. Of spindle speed | 8 |
| Spindle speed range | 40 to 1200 RPM * |
| Taper in spindle | MT-5 |
| Spindle bore | 38 mm |
| Spindle nose | A2 – 4 |
| Threads | |
| Lead screw diameter / pitch | 31.75 mm / 4 TPI |
| Nos. Of threads/range (without norton gear box) |
METRIC : 24 / 0.5 mm to 15 mm PITCH INCH : 44 / 2 to 60 TPI |
| No. of feeds | 40 |
| Range of longitudinal feeds | 0.066 – 2 mm |
| Range of transverse feeds | 0.0165 – 0.5 mm |
| Tail stock | |
| Tail stock spindle diameter | 50.8 mm |
| Taper in tail stock quill | MT – 4 |
| Travel and tools | |
| Cross slide travel | 230 mm |
| Compound slide travel | 140 mm |
| Tail stock sleeve travel | 140 mm |
| Tool post square | 100 mm |
| Tool shank size | 20 mm |
| Suitable electrical hp | 2 HP (3 phase) |
*As improvements are constantly made in our machines, the above illustrations, specifications, dimensions and technical data are subject to modifications and change without prior notice and not binding on us.