| BED | ||||||||
| Length of Bed | 7′ (2100 mm) | 9′ (2740 mm) | 10′ (3040 mm) | 12′ (3650 mm) | 14′ (4260 mm) | 16′ (4850 mm) | 18′ (5450 mm) | 20′ (6050 mm) |
| Admit Between Centre | 1000 mm | 1600 mm | 1900 mm | 2500 mm | 3100 mm | 3700 mm | 4300 mm | 4900 mm |
Cone Pulley Heavy Duty Lathe Machine Model No. VH- 13
Chuck back plate
Centre adapter
Dead centres 2 nos
Tool post spanner
Thread dial indicator
Change gear set
Chip tray
Motor pulley
Independent chuck
Self centring chuck
Chuck back plate extra
Steady rest
Follow rest
Face plate
Carrier plate
Taper turning attachment
Coolant pump with tank and fittings
Rear tool post
Electricals (motor, wiring, switch, v- belts and fittings)
Norton gear box (Single or Double Shaft)
Splash guard
Foundation round plate with levelling bolts
Quick change tool post
Key way attachment
Electrical third shaft
- Standard Accessories
-
Chuck back plateCentre adapterDead centres 2 nosTool post spannerThread dial indicatorChange gear setChip trayMotor pulley
- Optional Accessories
-
Independent chuckSelf centring chuckChuck back plate extraSteady restFollow restFace plateCarrier plateTaper turning attachmentCoolant pump with tank and fittingsRear tool postElectricals (motor, wiring, switch, v- belts and fittings)Norton gear box (Single or Double Shaft)Splash guardFoundation round plate with levelling boltsQuick change tool postKey way attachmentElectrical third shaft
| Type of bed | Hardened Bed Ways | |
|---|---|---|
| Height of centre | 267 mm ( 10-1/2″ ) | 304 mm ( 12″ ) |
| Swing over bed | 525 mm | 600 mm |
| Swing over cross slide | 320 mm | 395 mm |
| Swing in gap | 800 mm | 875 mm |
| Width of bed | 325 mm | |
| Length of gap in front of face plate | 200 mm | |
| Main spindle | |
| No. Of spindle speed | 8 |
| Spindle speed range | 40 to 340 RPM* |
| Taper in spindle | MT-6 |
| Spindle bore | 50 mm / 79 mm / 104 mm |
| Spindle nose | Threaded |
| Spindle thread | 6 TPI |
| Threads | |
| Lead screw diameter / pitch | 38 mm / 4 TPI |
| Nos. Of threads/range (without norton gear box) |
METRIC : 13 / 1 mm to 6 mm PITCH INCH : 19 / 2 to 24 TPI |
| Nos. Of threads/range (for ful norton gear box) |
METRIC : 24 / 0.5 mm to 15 mm PITCH INCH : 44 / 2 to 60 TPI |
| No. of feeds | 19 |
| Range of longitudinal feeds | 0.165 – 1.996 mm |
| Range of transverse feeds | 0.04 – 0.485 mm |
| Tail stock | |
| Tail stock spindle diameter | 60.3 mm |
| Taper in tail stock quill | MT – 4 |
| Travel and tools | |
| Cross slide travel | 280 mm |
| Compound slide travel | 145 mm |
| Tail stock sleeve travel | 170 mm |
| Tool post square | 120 mm |
| Tool shank size | 25 mm |
| Suitable electrical hp | 3 HP / 5 HP (3 phase)* |
*As improvements are constantly made in our machines, the above illustrations, specifications, dimensions and technical data are subject to modifications and change without prior notice and not binding on us.