| Type of bed | Hardened Bed Ways |
|---|---|
| Length of Bed | 1370 mm ( 4′-6″ ) |
| Admit between Centre | 660 mm |
| Swing over bed | 325 mm |
| Height of centre | 165 mm |
| Width of bed | 240 mm |
| Swing over cross slide | 175 mm |
| Swing in gap | 500 mm |
| Length of gap in front of face plate | 115 mm |
Geared Head Light Duty Lathe Machine Model No. VGL- 165
Chuck back plate
Centre adapter
Dead centres 2 nos
Tool post spanner
Motor pulley
Thread dial indicator
Change gear set
Chip tray
Norton gear box with double shaft
Independent chuck
Self centring chuck
Chuck back plate extra
Steady rest
Follow rest
Face plate
Carrier plate
Taper turning attachment
Coolant pump with tank and fittings
Rear tool post
Electricals (motor, wiring, switch, v- belts and fittings)
Splash guard
Foundation round plate with levelling bolts
Quick change tool post
Key way attachment
Padel stop
Electrical third shaft
- Standard Accessories
-
Chuck back plateCentre adapterDead centres 2 nosTool post spannerMotor pulleyThread dial indicatorChange gear setChip trayNorton gear box with double shaft
- Optional Accessories
-
Independent chuckSelf centring chuckChuck back plate extraSteady restFollow restFace plateCarrier plateTaper turning attachmentCoolant pump with tank and fittingsRear tool postElectricals (motor, wiring, switch, v- belts and fittings)Splash guardFoundation round plate with levelling boltsQuick change tool postKey way attachmentPadel stopElectrical third shaft
| Main spindle | |
| No. Of spindle speed | 8 |
| Spindle speed range | 40 to 1200 RPM * |
| Taper in spindle | MT-5 |
| Spindle bore | 38 mm |
| Spindle nose | Threaded / A2 – 4 |
| Threads | |
| Lead screw diameter / pitch | 25.4 mm / 4 TPI |
| Nos. Of threads/range (without norton gear box) |
METRIC : 24 / 0.5 mm to 15 mm PITCH INCH : 44 / 2 to 60 TPI |
| No. of feeds | 40 |
| Range of longitudinal feeds | 0.066 – 2 mm |
| Range of transverse feeds | 0.0165 – 0.5 mm |
| Tail stock | |
| Tail stock spindle diameter | 38.1 mm |
| Taper in tail stock quill | MT – 3 |
| Travel and tools | |
| Cross slide travel | 175 mm |
| Compound slide travel | 125 mm |
| Tail stock sleeve travel | 125 mm |
| Tool post square | 88 x 88 mm |
| Tool shank size | 20 mm |
| Suitable electrical hp | 1 HP (3 phase) |
*As improvements are constantly made in our machines, the above illustrations, specifications, dimensions and technical data are subject to modifications and change without prior notice and not binding on us.