| BED | |||||||||||
| Length of Bed | 10′ (3040 mm) | 12′ (3650 mm) | 14′ (4260 mm) | 16′ (4850 mm) | 14′ (4260 mm) | 18′ (5450 mm) | 18′ (5450 mm) | 20′ (6050 mm) | 22′ (6650 mm) | 24′ (7250 mm) | 26′ (7850 mm) |
| Admit Between Centre | 1200 mm | 1800 mm | 2400 mm | 3000 mm | 2800 mm | 3600 mm | 4000 mm | 4200 mm | 4800 mm | 5400 mm | 6000 mm |
| Type of bed | Hardened Bed Ways | |
|---|---|---|
| Height of centre | 558 mm ( 22″ ) | 609 mm ( 24″ ) |
| Swing over bed | 1075 mm | 1175 mm |
| Swing over cross slide | 750 mm | 850 mm |
| Swing in gap | 1400 mm | 1500 mm |
| Width of bed | 660 mm | |
| Length of gap in front of face plate | 250 mm* | |
| Main spindle | |
| No. Of spindle speed | 8 |
| Spindle speed range | 14 to 200 RPM* |
| Taper in spindle | MT-6 |
| Spindle bore | 115 mm |
| Spindle nose | A2-11 |
| Threads | |
| Lead screw diameter / pitch | 44.4 mm / 2 TPI |
| Nos. Of threads/range (without norton gear box) |
METRIC : 24 / 0.5 mm to 15 mm PITCH INCH : 44 / 2 to 60 TPI |
| No. of feeds | 40 |
| Range of longitudinal feeds | 0.066 – 2 mm |
| Range of transverse feeds | 0.0165 – 0.5 mm |
| Tail stock | |
| Tail stock spindle diameter | 100 mm |
| Taper in tail stock quill | MT – 5 |
| Travel and tools | |
| Cross slide travel | 550 mm* |
| Compound slide travel | 250 mm |
| Tail stock sleeve travel | 250 mm |
| Tool post square | 200 mm |
| Tool shank size | 38 mm |
| Suitable electrical hp | 15 HP (3 phase) (960 RPM) |
*As improvements are constantly made in our machines, the above illustrations, specifications, dimensions and technical data are subject to modifications and change without prior notice and not binding on us.
