| BED | |||||||||||
| Length of Bed | 7′ (2100 mm) | 9′ (2740 mm) | 10′ (3040 mm) | 12′ (3650 mm) | 14′ (4260 mm) | 16′ (4850 mm) | 18′ (5450 mm) | 20′ (6050 mm) | 22′ (6650 mm) | 24′ (7250 mm) | 26′ (7850 mm) |
| Admit Between Centre | 1000 m.m. | 1600 m.m. | 1900 m.m. | 2500 m.m. | 3100 m.m. | 3700 m.m. | – | 4900 m.m. | 5500 m.m. | 6100 m.m. | 6700 m.m. |
| Type of bed | Hardened Bed Ways | ||
|---|---|---|---|
| Height of centre | 304 mm ( 12″ ) | 355 mm ( 14″ ) | 380 mm ( 15″ ) |
| Swing over bed | 580 mm | 680 mm | 730 mm |
| Swing over cross slide | 390 mm | 490 mm | 540 mm |
| Swing in gap | 890 mm | 990 mm | 1040 mm |
| Width of bed | 375 mm | ||
| Length of gap in front of face plate | 200 mm | ||
| Main spindle | |
| No. Of spindle speed | 12 |
| Spindle speed range | 30 to 1060 RPM * |
| Taper in spindle | MT-6 |
| Spindle bore | 79 mm / 104 mm |
| Spindle nose | A2-8 |
| Threads | |
| Lead screw diameter / pitch | 38 mm / 4 TPI |
| Nos. Of threads/range (without norton gear box) |
METRIC : 24 / 0.5 mm to15 mm PITCH INCH : 44 / 2 to 60 TPI |
| No. of feeds | 40 |
| Range of longitudinal feeds | 0.066 – 2 mm |
| Range of transverse feeds | 0.0165 – 0.5 mm |
| Tail stock | |
| Tail stock spindle diameter | 60.3 mm |
| Taper in tail stock quill | MT – 4 |
| Travel and tools | |
| Cross slide travel | 325 mm |
| Compound slide travel | 190 mm |
| Tail stock sleeve travel | 170 mm |
| Tool post square | 145 mm |
| Tool shank size | 25 mm |
| Suitable electrical hp | 5 HP (3 phase)* |
*As improvements are constantly made in our machines, the above illustrations, specifications, dimensions and technical data are subject to modifications and change without prior notice and not binding on us.
